RYCO H5000 - ỐNG THỦY LỰC ĐẲNG ÁP 4-6 LỚP KẼM (WP 5100PSI/350BAR)

Last updated 3 mins ago

RYCO H5000 - ISO BARIC SPIRAL

EN 856 Type R13, ISO 18752-CC, SAE 100R13
 

 

RECOMMENDED FOR: 								

Very high pressure hydraulic oil lines. Constant pressure                                                                   
(Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius is                                                              
an advantage in installations.                                                                                                               

PERFORMANCE:                                                                                                                                 
Meets or Exceeds the Performance Requirements of:                                                                          
EN 856 Type R13, ISO 18752-CC, SAE 100R13.                                                                                 

TUBE:                                                                                                                                                    
Black, oil resistant synthetic rubber.                                                                                                      

REINFORCEMENT:                                                                                                                              
Four (-06 to -20 size) and six (-24 to -32 size) alternating                                                                    
layers of spiralled high tensile steel wire.                                                                                           

COVER:                                                                                                                                                 
DIEHARD™
Black, oil and extra abrasion resistant synthetic                                                            
rubber. Flame Resistant, Anti-Static (FRAS) & MSHA                                                                           
compliant. Highly visible layline branding for easy and
permanent identification. No skiving required with T6000 &
T7000 Series Crimp Couplings.
FEATURES:
Tested to 1 million impulse cycles at up to 1/2 SAE 100R13
Minimum Bend Radius. Constant pressure 350 bar / 5100 psi
in all sizes for easy system design and hose selection.
Small bend radius is an advantage in installations.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARD™
complies with Flame Resistant and Electrical
Resistance (Anti-Static) requirements of Australian Standard
AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US
Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +121°C, (-40°F to +250°F.)
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor
(maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T7000 Series
(sizes -06 to -24) pages 272 to 302.
T6000 Series (size -12 to -32) pages 250 to 270.
Assembly Instructions pages 478


 

Có thể bạn quan tâm

phone
logo
CALL US NOW ON

0901.355.335

WE ARE OPEN 24/7 FOR ASSISTANCE

logo